{"product_id":"4-figure-1502-hammer-union-retainer-segments-set-of-3-oil-gas-flowline-part","title":"4\" Figure 1502 Hammer Union Retainer Segments (Set of 3) – Oil \u0026 Gas Flowline Part","description":"\u003cp data-path-to-node=\"4\"\u003eThe 4\" Figure 1502 Retainer Segment Set is a high-strength structural component essential for the assembly and pressure-containing integrity of large-bore hammer unions. Designed specifically for the 4-inch Figure 1502 male sub, these three precision-machined segments fit into the machined groove behind the male sub’s sealing face. They create the heavy-duty load-bearing shoulder that the wing nut pulls against, enabling the union to achieve its rated 15,000 PSI seal.\u003c\/p\u003e\n\u003cp data-path-to-node=\"5\"\u003eGiven the large diameter and the massive axial forces present in 4-inch high-pressure lines, these segments are manufactured from premium-grade forged alloy steel and heat-treated to optimize hardness and fatigue resistance. Because the wing nut must be able to slide onto the pipe during assembly, the shoulder must be \"split.\" This three-piece design allows for easy installation over the flared lip of the male sub, which is then secured by a retainer ring to make the wing nut a captive, rotating component.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eEssential for the maintenance and recertification of high-volume flowback iron and frac manifolds, this segment set allows field technicians to rebuild expensive 4-inch swivel joints and pup joints by replacing only the wear-prone mechanical components.\u003c\/p\u003e\n\u003cp data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eFeatures \u0026amp; Benefits\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003e15,000 PSI CWP Compatibility:\u003c\/b\u003e Engineered to support the extreme mechanical loads required for 4-inch 15M flowline connections.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eHeavy-Duty Forged Steel:\u003c\/b\u003e High-tensile material provides maximum resistance to deformation and cracking under intense sledgehammer \"make-up\" forces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003ePrecision Machining:\u003c\/b\u003e Each segment is machined to exact tolerances to ensure 100% contact within the male sub groove, preventing uneven load distribution.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003eInterlocking Set of 3:\u003c\/b\u003e Provided as a matched set of three 120-degree pieces to form a complete 360-degree high-strength shoulder.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,4,0\"\u003e\u003cb data-path-to-node=\"8,4,0\" data-index-in-node=\"0\"\u003eSevere Service Ready:\u003c\/b\u003e Built to withstand the high vibration and abrasive environments typical of hydraulic fracturing and high-rate well testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,5,0\"\u003e\u003cb data-path-to-node=\"8,5,0\" data-index-in-node=\"0\"\u003eCost-Efficient Maintenance:\u003c\/b\u003e Enables the repair of male hammer union ends in the field, extending the service life of large-bore flowline iron.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eSpecifications \u0026amp; Technical Details\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable data-path-to-node=\"10\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCategory\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,1,0,0\"\u003e\u003cb data-path-to-node=\"10,1,0,0\" data-index-in-node=\"0\"\u003eComponent Type\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,1,1,0\"\u003eRetainer Segments (Lugs \/ Inserts)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,2,0,0\"\u003e\u003cb data-path-to-node=\"10,2,0,0\" data-index-in-node=\"0\"\u003eCompatibility\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,2,1,0\"\u003e4\" Figure 1502 Male Hammer Union Subs\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,3,0,0\"\u003e\u003cb data-path-to-node=\"10,3,0,0\" data-index-in-node=\"0\"\u003ePressure Rating of Assembly\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,3,1,0\"\u003e15,000 PSI CWP (15M)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,4,0,0\"\u003e\u003cb data-path-to-node=\"10,4,0,0\" data-index-in-node=\"0\"\u003eMaterial\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,4,1,0\"\u003eHigh-Strength Forged Alloy Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,5,0,0\"\u003e\u003cb data-path-to-node=\"10,5,0,0\" data-index-in-node=\"0\"\u003eQuantity per Set\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,5,1,0\"\u003e3 Pieces (Matched Set)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,6,0,0\"\u003e\u003cb data-path-to-node=\"10,6,0,0\" data-index-in-node=\"0\"\u003eService Type\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,6,1,0\"\u003eStandard and Sour Service (NACE MR0175)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,7,0,0\"\u003e\u003cb data-path-to-node=\"10,7,0,0\" data-index-in-node=\"0\"\u003eTypical Applications\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,7,1,0\"\u003e4\" Frac iron, pump discharge lines, high-volume manifolds\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,8,0,0\"\u003e\u003cb data-path-to-node=\"10,8,0,0\" data-index-in-node=\"0\"\u003eDurability\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"10,8,1,0\"\u003eHeat-treated for impact and fatigue resistance\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eApplications\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"12\"\u003eThis 4\" Figure 1502 segment set is utilized for the assembly and repair of high-pressure, high-volume hammer union connections. Typical applications include rebuilding 4-inch frac pup joints, securing wing nuts on large-bore style 10 and style 50 swivel joints, and maintaining the primary inlet\/outlet connections on high-pressure stimulation and flowback manifolds.\u003c\/p\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eQuality Assurance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14\"\u003eEach segment set undergoes rigorous quality control, including non-destructive examination (NDE) and dimensional verification. The metallurgy is tested to ensure it meets the specific hardness requirements necessary to prevent shoulder \"rolling\" or failure under the maximum 15,000 PSI operational loads encountered in the field.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eRequest a Quote\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003e📞 +1 405 666 5011\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003e📧 seo@blazess.com\u003c\/p\u003e","brand":"Blaze Sales \u0026 Service","offers":[{"title":"Default Title","offer_id":48083089686773,"sku":"41502WSK","price":312.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0770\/5785\/1637\/files\/4_Fig_1502_Hammer_Union_Retainer_Segments_Set_of_3_15K_PSI.png?v=1777568808","url":"https:\/\/blazess.com\/ar\/products\/4-figure-1502-hammer-union-retainer-segments-set-of-3-oil-gas-flowline-part","provider":"Blaze Sales \u0026 Service","version":"1.0","type":"link"}