1502 Plug Valve & Gate Valve
1502 Plug Valve
Our supplied 1502 PLUG valve come with these special design features:
1. BLAZE’s supplied valve bodies are made from alloy steel forgings which are designed to variety of end connections to be integrally machined.
2. Our supplied plug and inserts are designed to resist abrasion and corrosion.
3. Valves can be easily adopted for hydraulic or pneumatic actuation.
4. We provide Valves in compliance with API-6A& API-Q1.
5. Our range is up to 15000 PSI WP.
ESD Plug Valve
Blaze supplied fig 1502 ESD Valve & 1502 plug valve for sale across USA. It is a lubricated, tapered seal, quarter-turn plug valve for rapid full open or close operation. The valve cavity is tapered to ensure uniform seating of the sealing inserts, providing a reliable seal at the full range of pressures.
ESD Valve and replacement parts are engineered to provide low operating torque and resistance to the toughest abrasive and corrosive conditions. Our ESD Valves are bench tested and pressure tested before location installation by a certified Service Technician.
GATE VALVE
BLAZE supplies Gate valve required for drilling and production operation in Slab and Expanding Gate style.
– Full bore through conduit
– Block and Bleed Mechanism
– Long-life seat
– Positive Seal by expand Mechanism
– In- line maintenance
– Non- Rising and Non- Balanced Stem
-Thrust bearing for the low torque operation
DART & FLAPPER VALVE
Blaze provide flow back protection in well service applications such as Acidizing, Cementing, Fracturing, Sand Control, and Well Kill. Available in 2″ and 3″ models with pressure ratings from 6,000 psi to 15,000 psi CWP. These spring-loaded dart checks assure flow back protection from 0 psi thru 15,000 psi.
Blaze’s unique, modular design allows the valve to be factory assembled for standard or reverse flow.
Blaze Swing Check Valve, also known as a Flapper Check, provides directional fluid flow control to many oilfield applications where flow direction is critical in applications without large and or hard solids. Fluid may flow into the valve ONLY in the direction of the FREE FLOW ARROW (FFA) as the flapper is then pushed open and out of the way of the incoming flow.
Relief or Pop Off Valve
Blaze’s Pressure Relief Valves provide safe, over-pressure protection for reciprocating pumps, treating lines, pressure vessels, and other equipment operating under high pressure. These valves make use of the systems own hydraulic force to open at the preset pressure, and will stay open while fluid flow is gradually diverted out the discharge port until the system pressure drops below the preset limit. When the predetermined and adjustable blowdown pressure is reached, the valve will automatically and smoothly close.
Discharge flow re-circulation design assures minimal hydraulic shock to the pumping device or treating iron during valve closure. Blaze Relief Valves are available in 2″ and 3″ models with operation pressure ranges from 150 to 20,000 psi for standard or sour service.
CHOKE VALVE
Positive Chokes & Beans
Positive Chokes accommodate fixed orifice dimensions. All BLAZE’s supplied Adjustable Chokes can be converted into Positive Chokes by replacing the bonnet assembly with an appropriate blanking plug assembly and choke bean.
CHOKE BEANS :
– BLAZE’s supplied choke beans are suitably hardened to maintain accuracy level for longer period.
– Tungsten Carbide lined choke Beans are available for high pressure drop and severe application.