2" 15,000 PSI Fig 1502 MxF Blast Joint (10.33" Length) – High-Pressure Flowline Fitting

The 2" Figure 1502 Male x Female (MxF) Blast Joint is a heavy-duty, sacrificial flowline component engineered to absorb and withstand extreme internal erosion and abrasive wear in high-velocity, high-pressure pumping operations. Rated for a Cold Working Pressure (CWP) of 15,000 PSI (15K), this critical fitting is specifically designed to protect permanent manifold systems, valves, and elbows from the severe, sand-laden fluids typically encountered during hydraulic fracturing (frac), cementing, and high-rate flowback operations.

Measuring 10.33 inches in overall length, this blast joint features standard 2" Figure 1502 hammer union connections—a Male end (integral sub) on one side and a Female end (threaded hub) on the other. It acts as an easily replaceable "wear spool." When highly abrasive fluids change direction or pass through restrictions (such as choke manifolds or downstream of frac valves), the resulting turbulence causes accelerated localized wear. By placing this heavy-walled blast joint in these high-turbulence zones, the joint absorbs the erosive forces, significantly extending the life of more expensive, complex manifold components.

Manufactured from premium, heat-treated forged alloy steel, the blast joint provides exceptional structural integrity and wall thickness, ensuring safe and reliable fluid containment even as internal wear occurs during aggressive stimulation operations.

Features & Benefits

• 15,000 PSI CWP Rating: Safely contains extreme fluid pressures inherent in modern hydraulic fracturing, cementing, and well intervention operations.

• Sacrificial Wear Protection: Thick-walled design absorbs the severe internal erosion caused by high-velocity proppants and abrasive slurries, protecting expensive manifold components.

• MxF Fig 1502 Connections: Features industry-standard 2" Figure 1502 Male x Female hammer union ends for rapid, secure integration into existing flowlines.

• Forged Alloy Steel Construction: Heat-treated for superior tensile strength, impact resistance, and maximum durability against abrasive wear.

• Optimized Length (10.33"): Provides a sufficient wear zone downstream of valves or elbows while maintaining a compact footprint in the manifold setup.

• Cost-Effective Maintenance: Easily inspected and replaced when worn, preventing catastrophic failures and extending the overall operational life of the flowline.

Specifications & Technical Details

Applications

This 2" Fig 1502 blast joint is strategically deployed in areas of high fluid turbulence where abrasive wear is maximized. Typical applications include installation immediately downstream of frac valves or choke valves, on the discharge side of high-pressure pumping units, within cementing manifolds, and in flowback loops where sand production is anticipated.

Quality Assurance

Each blast joint is manufactured to exacting standards under rigorous quality control protocols. The component undergoes strict dimensional inspection, particularly focusing on the critical internal wall thickness and the integrity of the hammer union connections. All units are fully traceable and undergo high-pressure hydrostatic testing to ensure fail-safe performance at 15,000 PSI.

Request a Quote

📞 +1 405 666 5011

📧 seo@blazess.com